Download Brochure
Model | TAR-63L | TAR-80L | TAR-100L | TAR-150L | TAR-225L | TAR-408L | TAR-800L | TAR-1000L | ||||
Control System | Balance temperature and humidity control system | |||||||||||
Temperature range | -70℃～150℃(Rapid temperature change -55℃～85℃；customizable linear/nonlinear throughout the process 5℃/min、10℃/min，15℃/min，20℃/min） | |||||||||||
Temperature fluctuation | ±0.5℃ | |||||||||||
Humidity fluctuation | ±2.5%R.H | |||||||||||
Temperature deviation | ±3.0℃ | |||||||||||
Humidity deviation | ±3%R.H(≥75%R.H）/±5%R.H(<75%R.H） | |||||||||||
Inner size (cm)
| W | 40 | 40 | 40 | 50 | 50 | 60 | 100 | 68 | |||
Ｈ | 45 | 50 | 50 | 60 | 75 | 85 | 100 | 80 | ||||
Ｄ | 35 | 40 | 50 | 50 | 60 | 80 | 80 | 75 | ||||
Rate of temperature changes（℃/min) | 5,10,15 | 5,10,15 | 5,10,15 | 5,10,15 | 5,10,15 | 5,10,15 | 5,10,15 | 5,10,15 | ||||
Inner material | ＳＵＳ３０４Advanced stainless steel | |||||||||||
Outer material | Cold rolled steel plate surface treatment by electrostatic spraying or SUS304 high-grade stainless steel | |||||||||||
Insulation material | High density polyurethane foam and glass fiber | |||||||||||
Freezing system | Water cooled or liquid state |
|
| |||||||||
Heater | High quality nickel chromium alloy heater | |||||||||||
Air-blower | centrifugal fan | |||||||||||
Controller | LCD color touch screen, Chinese/English display, program, communication function | |||||||||||
Protector | Non fuse switch, compressor overpressure, overheating, overcurrent protection, overtemperature protection, fan overload protection, fuse, dry burning machine protector, water shortage protection switch, fault warning system, alarm | |||||||||||
Standard accessories | One observation window for the three-layer vacuum layer, one Ø 5cm test hole, two sets of experimental racks, one illumination board inside the box, four indicator lights, four mobile work wheels, one humidification water tank, two meters of power cord, and communication interface | |||||||||||
Optional | RS-232C, Recorder, special tester, special test rack, adding fence partitions | |||||||||||
Environmental temperature for use | 5℃～35℃ | |||||||||||
Supply power | AC380±10% 50HZ Three-phase four wire + PE | |||||||||||
Temperature Control Range
What is the ESS
Environmental Stress Screening is a screening test during the production process. By applying environmental stresses such as temperature cycles, rapid temperature changes, and vibrations, it artificially accelerates the aging of the products, exposing potential defects (such as poor soldering, poor contact, material flaws, etc.) in advance, thus preventing the products from failing at the user end after leaving the factory.
Process Advantages:
- Expose potential defects in advance, significantly reducing the early failure rate after production.
- No need to damage the product. Achieve non-destructive screening through temperature cycling, vibration, etc. stress.
- Improve the overall reliability of the product, reducing after-sales repairs and quality complaints.
- Shorten the quality control cycle, more efficient than conventional aging, suitable for mass production.
Compliance & Standards
- IEC 60068-2-14
- IPC-9701
- JEDEC JESD22-A104
- MIL-STD-810H
